Flamco Prescor B

Flamco Group  

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter 

Safety Valves and Pressure Gauges  

Flamco has a complete range of products to protect sealed cooling, heating and solar installations. For example, the different versions of our Prescor safety valves are used internationally to prevent overpressure situations in sealed systems. The broad Pressure Safety portfolio for potable installations protects drinking water systems and potable installations. For example, our Prescor BFP removes the risk of pollution or contamination of a drinking water network, temperature control and inlet combination valves for drinking water systems protect against exceeding the maximum pressure..  

Safety Valves  

Prescor Safety Valves Water Heaters  

For protecting water heaters and potable water systems.

When the system pressure reaches the set pressure, the Prescor B boiler valve begins to vent, whereby the pressure stops rising. If, due to specific circumstances, the pressure rapidly rises over the set pressure, the Prescor B boiler valve will open fully, creating a large blow off capacity. This is a permanent, reliable safeguard against overpressure. Venting can be prevented by installing a suitably sized Airfix expansion vessel for sanitary systems.

The seating of Prescor boiler valves is designed so that it not only makes a perfect seal but can also achieve a large blow-off capacity.

The hardness of the rubber is adapted according to the set pressure of the safety valve. Due to this combination of a specifically designed seating and special rubber it is possible to achieve optimum safety.

Wide range so that the correct valve can be selected appropriate to the application.

Can be used in combination with any storage boiler system.

Because of the ''pop'' effect these valves have a high blow-off capacity.

Solid brass housing.

Valve seat with silicon free rubber seal.

Anti-ageing steel spring maintains the set pressure accurately.

With silicon free diaphragm that prevents moisture and dirt from getting into the moving parts.

Construction and choice of materials are your guarantee of accuracy and safety.

In accordance with PED 2014/68/EU and EN 12516-3..  

Prescor B

For protecting water heaters and potable water systems.

When the system pressure reaches the set pressure, the Prescor B boiler valve begins to vent, whereby the pressure stops rising. If, due to specific circumstances, the pressure rapidly rises over the set pressure, the Prescor B boiler valve will open fully, creating a large blow off capacity. This is a permanent, reliable safeguard against overpressure. Venting can be prevented by installing a suitably sized Airfix expansion vessel for sanitary systems.

The seating of Prescor boiler valves is designed so that it not only makes a perfect seal but can also achieve a large blow-off capacity.

The hardness of the rubber is adapted according to the set pressure of the safety valve. Due to this combination of a specifically designed seating and special rubber it is possible to achieve optimum safety.

Wide range so that the correct valve can be selected appropriate to the application.

Can be used in combination with any storage boiler system.

Because of the ''pop'' effect these valves have a high blow-off capacity.

Solid brass housing.

Valve seat with silicon free rubber seal.

Anti-ageing steel spring maintains the set pressure accurately.

With silicon free diaphragm that prevents moisture and dirt from getting into the moving parts.

Construction and choice of materials are your guarantee of accuracy and safety.   

Technical Specifications 

Minimum/Maximum working temperature: 0 °C / 95 °C.

Peak load: 140 °C.

In accordance with PED 2014/68/EU and EN 12516-3. 

Flamco Flexcon 2 - 80

Flamco Group  

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Expansion Systems 

Flamco carries a wide range of expansion vessels, equipped with innovative technology. Both the steel shell and the membrane are of top quality and guarantee a long service life. In addition to expansion vessels, Flamco produces an extensive range of automat expansion machines with compressor control (Flexcon M-K series) or with pump control (Flamcomat), all characterized by optimum technical performance and equipped with an easy-to-use display. These automat machines keep the pressure in the installation balanced and constant, regardless of the temperature of the water. Due to their high volume efficiency, they are more space-saving than normal expansion vessels. Flamco also has a wide range of topup equipment as an addition to the automat products or traditional expansion vessels.  

Expansion Vessels

Flamco produces a comprehensive range of diaphragm expansion vessels. Both the steel vessel and the diaphragm are of the highest quality. They are compliant with all prevailing European standards and carry the CE mark of conformity. Flamco vessels are available for both potable, chilled and heated water systems in sizes ranging from 2 litres up to 8,000 litres...

Flexcon

For sealed heating installations (acc. to EN12828) and chilled water (cooling) installations.

Flexcon advantages

Flexible diaphragms with rolling action.

The unique clench ring construction clamps the diaphragm between the two vessel halves.

Nitrogen gas filling for longer maintenance of pre-pressure.

The ribbed profile on the diaphragm prevents it from sticking to the inside wall of the vessel and ensures inflow of expansion water at the slightest increase in pressure.

Uncoated water connection thread ensures easy and water tight installation.

Top quality steel.

Finished with a gleaming epoxy-powder coating.

Each vessel is factory tested.

Suitable for addition of glycol-based anti-freeze up to 50%.

Vessels in accordance with EN13831.

Suitable for systems with a maximum system temperature of 120 °C.

Min. / max. temperature diaphragm: -10 / 70 °C.

In accordance with Pressure Equipment Directive 2014/68/EU.

Flexcon 2 - 80

For sealed heating installations (acc. to EN12828) and chilled water (cooling) installations.

Flexible diaphragms with rolling action.

The unique clench ring construction clamps the diaphragm between the two vessel halves.

Nitrogen gas filling for longer maintenance of pre-pressure.

The ribbed profile on the diaphragm prevents it from sticking to the inside wall of the vessel and ensures inflow of expansion water at the slightest increase in pressure.

Uncoated water connection thread ensures easy and water tight installation.

Top quality steel.

Finished with a gleaming epoxy-powder coating.

Each vessel is factory tested

Technical Specifications  

Maximum working pressure: 3.0 or 6.0 bar.

Vessels in accordance with EN13831.

Suitable for systems with a maximum system temperature of 120 °C.

Minimum / maximum temperature diaphragm: -10 / 70 °C.

Red (RAL 3002) epoxy powder coating (18 litre also available in white).

Suitable for addition of glycol-based anti-freeze up to 50%.

In accordance with Pressure Equipment Directive 2014/68/EU.

Deep drawn steel vessel halves with zinc plated steel clench ring.

Flexcon 35 - 80: With feet and including mounting kit.

Meiflex Reinforced hoses for sanitary / heating / air-conditioning F x M

Flamco Group  

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Products for Potable Water 

Flamco offers a wide range of safety and hygienic solution products with a long service life for potable water installations. Ranging from fittings to pressure safety and expansion vessels to tap water stations. With our innovative solutions, we ensure lower energy and water consumption thanks to design focus and system performance.  

Reinforced Hoses

Meiflex Reinforced hoses for sanitary / heating / air-conditioning F x M

Meiflex reinforced hoses for sanitary / heating / air-conditioning with stainless steel braid and silicone inliner.

Reinforced hoses with stainless steel braid for sanitary, heating and air-conditioning systems with red / red / blue identification.

Internal hose made from hygienically safe silicone (odourless, hypo-allergenic, tasteless, not impermeable to oxygen in the air).

Universally applicable for sanitary, heating and air-conditioning applications.

Highly flexible connection in certified quality

Technical Specifications  

For temperatures up to +110 °C (domestic water up to 90 °C).

Operating pressures: 16 bar (up to 100 °C), 10 bar (up to 110 °C).

Specified production tolerances max. +/- 2.5%.

DVGW sanitary test, TÜV inspection for heating / air-conditioning.

Article number, technical data and application on label, including seals.

Further details can be obtained from the current technical information.

Flamco BKK Pipe Hangers

Flamco Group  

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Fixing Technology 

With FlamcoFix mounting materials, we offer an extensive range of clips, rails and mounting accessories for pipe fixing. Flamco provides a suitable solution for fixing a wide range of installations on floors, walls, ceilings or roofs. The FlamcoFix mounting materials stand for Safety, Quality and Efficiency..  

Pipe Hangers and Sprinkler Clips
Many thousands of kilometres of piping are suspended from the roofs of buildings in every country. Flamco's comprehensive range of pipe supports offers a complete solution for mounting threaded tubes, thin-wall steel pipes, copper pipes, plastic pipes and rail structures safely, easily and reliably. Flamco also offers a range of certified pipe hangers for sprinkler systems. In short, Flamco offers a solution for any conceivable situation.

Baseboard System with Electric Cable Channel

BKK Pipe Hangers

BKK pipe hangers are designed for mounting copper pipes to the ceiling. The hanger consists of a ball element, a sleeve and a one piece clip. Due to the ball element, the pipe hangers have an axial movement of up to 6° from vertical in any direction. This allows for unrestricted pipe expansion during fluctuations in temperature, without damaging the installation. The length of the sleeve is designed to enable the pipe to be insulated even after mounting the installation, without restricting the axial movement of the ball element. When buying your BKK pipe hangers at Flamco, you are certain to receive the highest possible quality.

Why choose BKK pipe hangers?

Flamco’s BKK pipe hangers are perfect for mounting copper pipes to a ceiling. The reason our pipe hangers are as suitable for this job? With our pipe hangers expect the following qualities:

One-piece clip guarantees a high permissible load.

Maximum swing of pipe hanger: 6° from vertical in any direction.

BKK pipe hangers are compatible with pipe sizes as per DIN EN 1057.

We have the right product to offer when looking for pipe hangers to mount other material pipes to the ceiling as well.

Flamco Outer Corner K for Cable Channel

Flamco Group  

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Emitter Technology 

Through our high-quality products we offer living comfort, providing warmth throughout your building. Our products offer safe and fast assembly, ease of use, and efficient heat dissipation. We also provide optimum solutions for renovation challenges. The range includes fittings for refrigeration and de-ware treatment, thermostatic control systems for heating and cooling systems, as well as a baseboard system for complete installation programs. The range is complemented by suitable connection techniques and heating accessories such as label holders, rosettes and mounting aids.  

Baseboard Systems

Baseboard System with Electric Cable Channel

Outer Corner K for Cable Channel

Technical Specifications  

Components made of plastic

Flamco Thermo Pressure Gauges

Flamco Group  

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Metering and Sensoring 

We offer a complete range for consumption registration and transmission of consumption data for heat or cold energy and water quantities. These include MID approved energy meters available as mechanical or ultrasonic devices, as well as hot and cold water meters with optional wireless modules. All products can be ideally combined with the Logotherm home stations. Electronic heat cost allocators complete the range. With the gateways, it is possible to send consumption data to the portal, where it can be directly retrieved or distributed.  

Pressure Gauges

Thermo Pressure Gauges

The combined pressure/thermo gauge shows not only the pressure, but also the temperature

.

Flamco NexusValve Fluctus with fill and drain ball valve / connection for NexusValve Passim

Flamco Group  

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Balancing and Control 

The complete range of NexusValve includes all types of static and dynamic balancing valves, differential pressure regulators and pre-adjustable lockable ball valves from DN15 to> DN300. The innovative NexusValve technology makes efficient installation and easy hydraulic balancing possible. Optimized valve construction and coordinated partner valves ensure perfect interaction and simplification of maintenance and service in the installation system. Manual pre-setting is possible due to the effective measurement and flow rate adjustment of the compact NexusValve measuring computer.  

Static circuit control valves

NexusValve Fluctus with fill and drain ball valve / connection for NexusValve Passim

The NexusValve Fluctus (Fixed Orificed Regulation Valve (FODRV)) is a combined static circuit control valve and shut-off valve for hot and cold circuits. Measurements are performed via Fluctus nozzle with fixed Kv value. Installation without stabilising sections; flow rate measurement without specifying the valve setting; shut-off with ball valve. Material: Housing, Fluctus spindle, measuring connections: dezincification resistant brass CW602N; ball / adjusting screw: dezincification resistant brass CW602N, chrome-plated.

Connection for NexusValve Passim (Differential Pressure Controle Valve (DPCV))..

.

Technical Specifications  

Measuring accuracy: +/- 3%.

Operating temperature: -20 °C to 120 °C.

Actuation: Handle.

Pressure rating: PN 25.

Connection: Female thread.

Nominal width: DN 15 - DN 50..