Flamco Group
The Flamco Group
is part of the Dutch technology concern Aalberts Industries N. V.
Flamco is
an internationally active group concentrating on technical products
in the field of heating, cooling and solar systems. Together with
their sister companies Meibes and Simplex they cover a
broad spectrum of innovative building technology systems.
The
synergy effects of this strong coalition
make Flamco a competent partner n total solutions are
desired – complete from the source to the emitter.
Expansion Systems
Flamco
carries a wide range of expansion vessels, equipped with innovative
technology. Both the steel shell and the membrane are of top quality
and guarantee a long service life. In addition to expansion vessels,
Flamco produces an extensive range of automat expansion machines with
compressor control (Flexcon M-K series) or with pump control
(Flamcomat), all characterized by optimum technical performance and
equipped with an easy-to-use display. These automat machines keep the
pressure in the installation balanced and constant, regardless of the
temperature of the water. Due to their high volume efficiency, they
are more space-saving than normal expansion vessels. Flamco also has
a wide range of topup equipment as an addition to the automat
products or traditional expansion vessels.
Expansion
Vessels
Flamco
produces a comprehensive range of diaphragm expansion vessels. Both
the steel vessel and the diaphragm are of the highest quality. They
are compliant with all prevailing European standards and carry the CE
mark of conformity. Flamco vessels are available for both potable,
chilled and heated water systems in sizes ranging from 2 litres up to
8,000 litres...
Flexcon
For
sealed heating installations (acc. to EN12828) and chilled water
(cooling) installations.
Flexcon
advantages
Flexible
diaphragms with rolling action.
The
unique clench ring construction clamps the diaphragm between the two
vessel halves.
Nitrogen
gas filling for longer maintenance of pre-pressure.
The
ribbed profile on the diaphragm prevents it from sticking to the
inside wall of the vessel and ensures inflow of expansion water at
the slightest increase in pressure.
Uncoated
water connection thread ensures easy and water tight installation.
Top
quality steel.
Finished
with a gleaming epoxy-powder coating.
Each
vessel is factory tested.
Suitable
for addition of glycol-based anti-freeze up to 50%.
Vessels
in accordance with EN13831.
Suitable
for systems with a maximum system temperature of 120 °C.
Min.
/ max. temperature diaphragm: -10 / 70 °C.
In
accordance with Pressure Equipment Directive 2014/68/EU.
Flexcon
2 - 80
For
sealed heating installations (acc. to EN12828) and chilled water
(cooling) installations.
Flexible
diaphragms with rolling action.
The
unique clench ring construction clamps the diaphragm between the two
vessel halves.
Nitrogen
gas filling for longer maintenance of pre-pressure.
The
ribbed profile on the diaphragm prevents it from sticking to the
inside wall of the vessel and ensures inflow of expansion water at
the slightest increase in pressure.
Uncoated
water connection thread ensures easy and water tight installation.
Top
quality steel.
Finished
with a gleaming epoxy-powder coating.
Each
vessel is factory tested
Technical
Specifications
Maximum
working pressure: 3.0 or 6.0 bar.
Vessels
in accordance with EN13831.
Suitable
for systems with a maximum system temperature of 120 °C.
Minimum
/ maximum temperature diaphragm: -10 / 70 °C.
Red
(RAL 3002) epoxy powder coating (18 litre also available in white).
Suitable
for addition of glycol-based anti-freeze up to 50%.
In
accordance with Pressure Equipment Directive 2014/68/EU.
Deep
drawn steel vessel halves with zinc plated steel clench ring.
Flexcon
35 - 80: With feet and including mounting kit.
No comments:
Post a Comment