Flamco Prescor B

Flamco Group  

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter 

Safety Valves and Pressure Gauges  

Flamco has a complete range of products to protect sealed cooling, heating and solar installations. For example, the different versions of our Prescor safety valves are used internationally to prevent overpressure situations in sealed systems. The broad Pressure Safety portfolio for potable installations protects drinking water systems and potable installations. For example, our Prescor BFP removes the risk of pollution or contamination of a drinking water network, temperature control and inlet combination valves for drinking water systems protect against exceeding the maximum pressure..  

Safety Valves  

Prescor Safety Valves Water Heaters  

For protecting water heaters and potable water systems.

When the system pressure reaches the set pressure, the Prescor B boiler valve begins to vent, whereby the pressure stops rising. If, due to specific circumstances, the pressure rapidly rises over the set pressure, the Prescor B boiler valve will open fully, creating a large blow off capacity. This is a permanent, reliable safeguard against overpressure. Venting can be prevented by installing a suitably sized Airfix expansion vessel for sanitary systems.

The seating of Prescor boiler valves is designed so that it not only makes a perfect seal but can also achieve a large blow-off capacity.

The hardness of the rubber is adapted according to the set pressure of the safety valve. Due to this combination of a specifically designed seating and special rubber it is possible to achieve optimum safety.

Wide range so that the correct valve can be selected appropriate to the application.

Can be used in combination with any storage boiler system.

Because of the ''pop'' effect these valves have a high blow-off capacity.

Solid brass housing.

Valve seat with silicon free rubber seal.

Anti-ageing steel spring maintains the set pressure accurately.

With silicon free diaphragm that prevents moisture and dirt from getting into the moving parts.

Construction and choice of materials are your guarantee of accuracy and safety.

In accordance with PED 2014/68/EU and EN 12516-3..  

Prescor B

For protecting water heaters and potable water systems.

When the system pressure reaches the set pressure, the Prescor B boiler valve begins to vent, whereby the pressure stops rising. If, due to specific circumstances, the pressure rapidly rises over the set pressure, the Prescor B boiler valve will open fully, creating a large blow off capacity. This is a permanent, reliable safeguard against overpressure. Venting can be prevented by installing a suitably sized Airfix expansion vessel for sanitary systems.

The seating of Prescor boiler valves is designed so that it not only makes a perfect seal but can also achieve a large blow-off capacity.

The hardness of the rubber is adapted according to the set pressure of the safety valve. Due to this combination of a specifically designed seating and special rubber it is possible to achieve optimum safety.

Wide range so that the correct valve can be selected appropriate to the application.

Can be used in combination with any storage boiler system.

Because of the ''pop'' effect these valves have a high blow-off capacity.

Solid brass housing.

Valve seat with silicon free rubber seal.

Anti-ageing steel spring maintains the set pressure accurately.

With silicon free diaphragm that prevents moisture and dirt from getting into the moving parts.

Construction and choice of materials are your guarantee of accuracy and safety.   

Technical Specifications 

Minimum/Maximum working temperature: 0 °C / 95 °C.

Peak load: 140 °C.

In accordance with PED 2014/68/EU and EN 12516-3. 

Flamco Pressure Gauges

Flamco Group  

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Safety Valves and Pressure Gauges 

Flamco has a complete range of products to protect sealed cooling, heating and solar installations. For example, the different versions of our Prescor safety valves are used internationally to prevent overpressure situations in sealed systems. The broad Pressure Safety portfolio for potable installations protects drinking water systems and potable installations. For example, our Prescor BFP removes the risk of pollution or contamination of a drinking water network, temperature control and inlet combination valves for drinking water systems protect against exceeding the maximum pressure.  

Pressure Gauges

Pressure Gauges

The pressure in the installation is indicated by the pressure gauge..

Technical Specifications  

Maximum working pressure: 6.0 bar.

Minimum / maximum working temperature (diaphragm): 1 / 70 °C.

Colour: White, RAL 9010.

In accordance with Pressure Equipment Directive 2014/68/EU.

Flamco Prescor IC

Flamco Group  

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Safety Valves and Pressure Gauges  

Flamco has a complete range of products to protect sealed cooling, heating and solar installations. For example, the different versions of our Prescor safety valves are used internationally to prevent overpressure situations in sealed systems. The broad Pressure Safety portfolio for potable installations protects drinking water systems and potable installations. For example, our Prescor BFP removes the risk of pollution or contamination of a drinking water network, temperature control and inlet combination valves for drinking water systems protect against exceeding the maximum pressure..  

Safety Groups

Prescor IC  

For protecting the potable water system from excess pressure during the heating cycle.

The non-return valve will prevent the water (e.g. from a water heater) from flowing back into the mains water pipe.

Suitable for all kinds of heated water preparation devices and storage apparatus.

With ball valve for easy, quick and safe opening and closing.

The funnel can be rotated up to 360°. Hence it can be fitted in almost any position.

Large flow-through capacity and therefore hardly any pressure drop over the safety group.

Very compact and therefore recommended for the most modern built-in devices.

Prescor IC ½": With coupling set for the funnel.  

Technical Specifications  

Minimum/Maximum working temperature: 0 °C / 95 °C.

In accordance with European standard EN-1488.

Main Body: Brass.

Guidance bus: PBTP GF30.

Spring: Stainless steel (DIN 17224).

Flamco Flexcon KSG Ecoplus

Flamco Group  

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Safety Valves and Pressure Gauges  

Flamco has a complete range of products to protect sealed cooling, heating and solar installations. For example, the different versions of our Prescor safety valves are used internationally to prevent overpressure situations in sealed systems. The broad Pressure Safety portfolio for potable installations protects drinking water systems and potable installations. For example, our Prescor BFP removes the risk of pollution or contamination of a drinking water network, temperature control and inlet combination valves for drinking water systems protect against exceeding the maximum pressure..  

Safety Sets

Flexcon KSG Ecoplus  

A Flexcon KSG boiler connection assembly is suitable for venting and safeguarding sealed heating or cooling systems including those with glycol-based additives (maximum 50%).

The Flexcon KSG boiler connection assembly inclusive of EPP insulation.

With a Flexvent automatic air vent, with valve sleeve, Flamco safety valve, pressure gauge with valve sleeve.  

Technical Specifications 

Minimum/Maximum working temperature: -10 °C / 90 °C.

Suitable for addition of glycol-based anti-freeze up to 50%.

Safety valve: ½" x ¾", 2.5 bar (110 kW).

Flexvent ⅜

" with shut-off valve.

Pressure gauge: Ø 61 mm, 6.0 bar with shut-off valve.

Insulation: material EPP - color: black.

Flamco Prescor

Flamco Group  

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Safety Valves and Pressure Gauges  

Flamco has a complete range of products to protect sealed cooling, heating and solar installations. For example, the different versions of our Prescor safety valves are used internationally to prevent overpressure situations in sealed systems. The broad Pressure Safety portfolio for potable installations protects drinking water systems and potable installations. For example, our Prescor BFP removes the risk of pollution or contamination of a drinking water network, temperature control and inlet combination valves for drinking water systems protect against exceeding the maximum pressure..  

Safety Valves  

Prescor Safety Valves Heating  

Prescor safety valves have a special shape which, not only achieves a perfect seal, but also provides a large blow off capacity. The valve seal is made of high quality rubber which is heat resistant to 140 °C and where the hardness of the rubber adjusts to the set pressure of the safety valve. In this way, the valve cannot stick to the seat.

All valves are tested before they leave our facility and are available for heating and cooling installations as well as for protection of various hot water storage appliances. For safety valves for potable water installations see "Accessories for Sanitary Installations".  

Prescor  

For sealed central heating and chilled water (cooling) installations. The valve opens when the pressure increases excessively.

Prescor safety valves have a special shape which, not only achieves a perfect seal, but also provides a large blow off capacity. The valve seal is made of high quality rubber which is heat resistant to 140 °C and where the hardness of the rubber adjusts to the set pressure of the safety valve. In this way, the valve cannot stick to the seat.

All valves are tested before they leave our facility and are available for heating and cooling installations as well as for protection of various hot water storage appliances. For safety valves for potable water installations see "Accessories for Sanitary Installations".

Specially designed pop action for full discharge at opening pressure to reduce the pressure quickly.

High quality materials and state-of-the-art design features guarantee a high degree of safety.

CE-conformity mark (PED 2014/68/EU), for application areas according to Pressure Equipment Directive.

The opening pressure of all valves is individually tested..   

Technical Specifications 

Minimum/Maximum working temperature: -10 °C / 120 °C.

Peak load: 140 °C.

Suitable for addition of glycol-based anti-freeze up to 50%.