Flamco Flamcovent Smart

Flamco Group  

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Air / Dirt Separation and Dosing Solutions 

Installations in which the water has been properly degassed, and are free from all kinds of dirt particles, use less energy, produce less noise and have a longer service life. Flamco products provide these sustainable solutions. In our products we use established principles combined with new technologies, such as with the XStream series of air and dirt separators, optimised to separate air and dirt particles from the system water in installations. In addition we offer solutions to easily introduce additives and cleaners to the system.  

Smart Air and Dirt Separators

Smart Air Separators

Flamcovent Smart 

More compact, lighter, cleaner and more efficient

For total elimination of air from heating and cooling installations.

Air separators increase comfort and improve the yield. Air separators also offer benefits in the event of application in old systems or when an open system is converted to a closed system.

Increases comfort and yield.

The removal of air from the system water extends the service life of pumps, control equipment and other system accessories.

The Flamcovent Smart air separators remove even the smallest microbubbles from the system water. They are virtually maintenance-free and the flow resistance is negligibly low.

60% better performance compared to conventional separators.

Flow velocity up to 3 m/s.

Can be used with all kinds of pipework.

Compact dimensions, light weight.

Extremely low flow resistance and low loss of energy.

Consistent performance throughout its service life.  

Technical Specifications  

Minimum/Maximum working temperature: -10 °C / 120 °C.

Maximum working pressure: 10 bar.

Suitable for addition of glycol-based anti-freeze up to 50%

Flamco Prescor IC

Flamco Group  

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Safety Valves and Pressure Gauges  

Flamco has a complete range of products to protect sealed cooling, heating and solar installations. For example, the different versions of our Prescor safety valves are used internationally to prevent overpressure situations in sealed systems. The broad Pressure Safety portfolio for potable installations protects drinking water systems and potable installations. For example, our Prescor BFP removes the risk of pollution or contamination of a drinking water network, temperature control and inlet combination valves for drinking water systems protect against exceeding the maximum pressure..  

Safety Groups

Prescor IC  

For protecting the potable water system from excess pressure during the heating cycle.

The non-return valve will prevent the water (e.g. from a water heater) from flowing back into the mains water pipe.

Suitable for all kinds of heated water preparation devices and storage apparatus.

With ball valve for easy, quick and safe opening and closing.

The funnel can be rotated up to 360°. Hence it can be fitted in almost any position.

Large flow-through capacity and therefore hardly any pressure drop over the safety group.

Very compact and therefore recommended for the most modern built-in devices.

Prescor IC ½": With coupling set for the funnel.  

Technical Specifications  

Minimum/Maximum working temperature: 0 °C / 95 °C.

In accordance with European standard EN-1488.

Main Body: Brass.

Guidance bus: PBTP GF30.

Spring: Stainless steel (DIN 17224).

Flamco Flexcon PA pressurisation assistant

Flamco Group   

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Expansion Systems   

Flamco carries a wide range of expansion vessels, equipped with innovative technology. Both the steel shell and the membrane are of top quality and guarantee a long service life. In addition to expansion vessels, Flamco produces an extensive range of automat expansion machines with compressor control (Flexcon M-K series) or with pump control (Flamcomat), all characterized by optimum technical performance and equipped with an easy-to-use display. These automat machines keep the pressure in the installation balanced and constant, regardless of the temperature of the water. Due to their high volume efficiency, they are more space-saving than normal expansion vessels. Flamco also has a wide range of topup equipment as an addition to the automat products or traditional expansion vessels.   

Topping Up   

Top Up Devices   

    

Flexcon PA pressurisation assistant   

The Flamco Flexcon PA pressurisation assistant is used to monitor heating systems and to assist the installer and end-user with pressure maintenance. The Flexcon PA logs and alerts when pressurisation problems occur and assists in (or control) topping-up the heating system to the correct working pressure. It can also advise on expansion vessel life expectancy without disconnecting the vessel and you can configure monitoring on maintenance intervals for third party components. The Flexcon PA comes with a smartphone/tablet application for advanced and complete delivery of system status and guided maintenance advice.

Eliminates unscheduled service call-outs for nuisance failures caused by pressure loss in the system, increasing comfort for end customers.

Monitoring of fill pressure, safety valve discharges, expansion vessel end of life span and scheduled maintenance intervals of any components.

The mobile app enables end customers to share event logs with their installer for remote support.

The Flexcon PA gives the installer eyes on site to see how the installation's pressurisation is functioning..   

  

   

Technical Specifications  

Suitable for heating systems up to 40,000 l and for addition of glycol-based anti-freeze up to 50%.

Power supply: 5V AC/DC adapter.

Working system temperature: 0 °C / 90 °C.

Working ambient temperature: 0 °C / 40 °C.

Working system pressure up to 3.5 bar.

Flow rate (filling): 0.7 m3 / hour.

Design pressure: PN 6.

Flamco CA Clips - 19 mm

Flamco Group   

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Fixing Technology   

With FlamcoFix mounting materials, we offer an extensive range of clips, rails and mounting accessories for pipe fixing. Flamco provides a suitable solution for fixing a wide range of installations on floors, walls, ceilings or roofs. The FlamcoFix mounting materials stand for Safety, Quality and Efficiency.   

Insulating Clips   

For chilled water pipes

CA Clips - 19 mm

For mounting pipework with an elastomer insulation to the wall or ceiling to prevent thermal losses.

Clip and pipework insulation form an integral component.

'Hook' shape allows easy pre-mounting of pipe.

Pipe can still be moved positioned after pre-mounting.

Easy to glue bond with pipework insulation. No thermal bridge.

Screw fitted with a retaining ring..

  

Technical Specifications  

Clip: Electrolytically zinc plated.

Insulation: 19 mm elastomeric foam with PIR core and coated with an aluminum foil.

Connection: M 12 with side connection bolt/nut M 10.

Insulation width: 100 mm.

PIR density 120 kg/m³, PIR pressure resistance 1,3 N/mm².

Suitable for temperatures from -45 °C up to +105 °C.

Thermal conductivity: maximal 0.036 W/(m.K).

Vapour permeability: 7,000 µ.

Fire rating B2 according to DIN 4102/1.

Fire rating B1 according to DIN 4102/1 as part of a system with tubes, elastomer insulation

Flamco Duo 120 - 500

Flamco Group   

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Products for Potable Water   

Flamco offers a wide range of safety and hygienic solution products with a long service life for potable water installations. Ranging from fittings to pressure safety and expansion vessels to tap water stations. With our innovative solutions, we ensure lower energy and water consumption thanks to design focus and system performance..   

Water Heaters  

Duo upright water heaters

Duo 120 - 500

An indirectly heated and upright water heater including a permanently welded-in heating coil, suitable for all modern heating systems.

Minimum lime deposits due to smooth surfaces. High-quality glass lining according to DIN 4753/part 3 for potable hot water production and optimum corrosion protection by means of a standard Mg-anode.

Equipped with a built-in thermometer and immersion pipe.

A set of adjustable feet is optionally available (Art.No. 18989).

From 400 litres, equipped with a DN 110 inspection flange at the side, suitable for connecting additional heating elements; Ex Works - closed with a removeable blind flange.

The heating coil is designed to ensure full depth heating to prevent the accretion of Legionella bacteria.

  

Technical Specifications  

Maximum working pressure: 10 bar (potable water vessel) / 16 bar (heating coil).

Maximum working temperature: 95 °C (potable water vessel) / 130 °C (heating coil).

Insulation:

Standard colours: white (RAL 9010) and white aluminium (RAL 9006).

Including hard foam insulation (direct foam injection) with a polystyrene outer shell.

Eid Mubarak!

Flamco Expansion compensator SI 10.

Flamco Group   

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Essential Valves and Fittings   

Flamco offers a wide range of components for quick installation and individual fittings for heating, air-conditioning and solar. Many of our particularly durable and low-maintenance fittings have proved their worth in long-term use and form an essential part of a wide range of installations. Worthy of special mention here are our pipe crossing fittings, gravity brakes (Backflow Limiters) and expansion compensators.

The T-plus branch creation clamp is particularly suitable for the extension, modification or renovation of an existing installation. So you no longer need to drain, depressurise or freeze the pipe when fitting a branch to it. The perfect way to avoid expensive down time.   

Expansion compensator SI 10.   

Soldered or screw fitting length expansion compensator with protective and guide housing, available with soldered ends or screw fittings with female threads.

Please observe the installation instructions in the current technical information brochure!

  

Technical Specifications  

 Material: Stainless steel extension bellows, brass housing and connections

Max. operating pressure: 10 bar

Max. operating temperature: 130 °C.