Flamco Group
The Flamco Group
is part of the Dutch technology concern Aalberts Industries N. V.
Flamco is
an internationally active group concentrating on technical products
in the field of heating, cooling and solar systems. Together with
their sister companies Meibes and
Simplex they cover a broad spectrum of innovative building technology
systems.
The
synergy effects of
this strong coalition make Flamco a competent
partner n total solutions are
desired – complete from the source to the emitter.
Air
/ Dirt Separation and Dosing Solutions
Installations
in which the water has been properly degassed, and are free from all
kinds of dirt particles, use less energy, produce less noise and have
a longer service life. Flamco products provide these sustainable
solutions. In our products we use established principles combined
with new technologies, such as with the XStream series of air and
dirt separators, optimised to separate air and dirt particles from
the system water in installations. In addition we offer solutions to
easily introduce additives and cleaners to the system.
.
Air Vents
Flexvent
automatic air vents
The
compact, proven design has high efficiency and guaranteed operation
for heating and air conditioning.
The
water within the installation contains air which can form corrosion
and reduce the thermal transfer. A Flexvent is fitted at places where
the air collects.
Flexvent
float vents are made of brass. Most types are equipped with a
shut-off valve for easy fitting and dismantling.
A
Flexvent float vent is easy to fit in any installation due to its
very small dimensions. The relatively large air cushion at the top of
each type of Flexvent float vent protects the valve seat sufficiently
against contamination so that the Flexvent will not leak.
To
guarantee top quality, we test all Flexvents before they leave our
factory..
Flexvent
The
compact, proven design has high efficiency and guaranteed operation
for heating and air conditioning.
The water within the installation contains air which can form corrosion and reduce the thermal transfer. A Flexvent is fitted at places where the air collects.
Float operated, the air is collected in the Flexvent causing the float to drop and open the air release valve. The water pressure then pushes the air out, the float rises and closes the valve.
The air cushion in the upper part of each Flexvent protects the valve seat against contamination.
The water within the installation contains air which can form corrosion and reduce the thermal transfer. A Flexvent is fitted at places where the air collects.
Float operated, the air is collected in the Flexvent causing the float to drop and open the air release valve. The water pressure then pushes the air out, the float rises and closes the valve.
The air cushion in the upper part of each Flexvent protects the valve seat against contamination.
With
protective cap including expansion sealer rings to prevent
leaks.Substantial distance between the water and the closing
mechanism, reducing the chance of contamination.Most types are
equipped with a shut-off valve for easy fitting and dismantling.A
Flexvent float vent is easy to fit in any installation due to its
very small dimensions.The relatively large air cushion at the top of
each type of Flexvent float vent protects the valve seat sufficiently
against contamination, so that the Flexvent will not leak.To
guarantee top quality, we test all Flexvents before they leave our
facility!
Technical
Specifications
Minimum/Maximum
working temperature: -10 °C / 90 °C (peak load: 120 °C).
Minimum/Maximum
working pressure: 0.2 / 10.0 bar (functional: 6.0 bar).
Suitable
for addition of glycol-based anti-freeze up to 50%.
No comments:
Post a Comment