Flamco NexusValve Fluctus

Flamco Group   

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Balancing and Control   

The complete range of NexusValve includes all types of static and dynamic balancing valves, differential pressure regulators and pre-adjustable lockable ball valves from DN15 to> DN300. The innovative NexusValve technology makes efficient installation and easy hydraulic balancing possible. Optimized valve construction and coordinated partner valves ensure perfect interaction and simplification of maintenance and service in the installation system. Manual pre-setting is possible due to the effective measurement and flow rate adjustment of the compact NexusValve measuring computer..   

Static circuit control valves   

NexusValve Fluctus

The NexusValve Fluctus (Fixed Orificed Regulation Valve (FODRV)) is a combined static circuit control valve and shut-off valve for hot and cold circuits. Measurements are performed via Venturi nozzle with fixed Kv value. Installation without stabilising sections; flow rate measurement without entering the pre-setting; shut-off with ball valve. Material: Housing, Venturi spindle, measuring connections: dezincification resistant brass CW602N; ball / adjusting screw: dezincification resistant brass CW602N, chrome-plated..

  

Technical Specifications  

  

Measuring accuracy: +/- 3%.

Operating temperature: -20 °C to 120 °C.

Actuation: Handle.

Pressure rating: PN 25.

Connection: Female thread.

Nominal width: DN 15 - DN 50.   

  

Flamco Distributor with installation frame

Flamco Group   

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Energy Distribution   

Energy distribution is divided into areas of heat distribution, systems for solar installation and flexible connections. Meibes offers an extensive range characterized by a high degree of modularity and ease of installation. The range facilitates up to 2,300kW and includes bulk distribution systems, pump groups up to DN65, hydraulic switches and optional accessories such as, control valves and servomotors. The connection systems are made from corrugated steel tubing or hoses and are of the highest quality and safety.

.   

Pump Groups and Manifolds   

Meibes offers complete systems for connection to free-standing and wall-mounted boilers in the ranges up to 70 kW, 100 kW and even 2300 kW. These can all comprise manifold modules (2- and/or 3-circuit), pump groups and hydraulic diverter (boiler guard) as required. The modular system makes insertion and installation extremely efficient. All components are pre-assembled, tested and sealed in the factory. Optional accessories such as meter installation fittings, control systems etc. can be included in delivery or integrated directly.

Specially developed for surface-mounted boilers, the TKM compact mixing circuit is particularly user-friendly. It is installed under or near the boiler with individual flexible connections suitable for all manufacturers/models. The groups are equipped with an integrated primary bypass, servomotor or thermostatic injection valve.

Advantages for you

Short installation times and speedy exchange.

Reliable design and calculation thanks to a complete modular system.

100% leak-tested, immediately ready-to-use.

Suitable for all boiler types and manufacturers.

Comprehensive range of accessories..

Universal Cascade    

Universal cascade for surface-mounted boiler systems of up to 480 kW total capacity.

Modules for 1 or 2 heaters with a width of up to 580 mm and up to 100 kg, and connections of up to 2" (DN 50).

Heating circuit can be connected on the right-hand or left-hand side

End cap with ½" coupler and stopper

Free-standing, sturdy mounting frame

Systems up to 110 °C and PN 10

Including height-adjustable feet

Advantages for you

Universally applicable for various heat generators (manufacturer-independent)

Easy installation, assembly and connection

Prefabricated EPP insulating shells for main pipelines

Can be combined with Meibes large manifold system with suitable connection set

Cascading surface-mounted boiler systems up to 480 kW.   .

Distributor with installation frame

For securing of the heaters.

Installation in a frame allows arbitrary placement anywhere in a room. A solid wall is not necessary, and other components can still be installed on the walls.

The frames are designed for 1 or 2 heaters, each up to 580 mm wide and each weighing 100 kg.

Flamco LogoComfort KS completed stations

Flamco Group   

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Transfer Stations   

The Logotherm home stations are efficient and compact home stations for various central applications in the field of district and local heating and freshwater production. Freshwater stations and decentralized applications use home stations for demand-oriented hot water, distribution of heat, and the transfer and distribution of cooling energy. Depending on the application and the requirement, these products are available with different control techniques from hydraulic, thermostatic or electronic control (with many other control and communication functions).   

Interface stations   

The Logotherm interface station is a compact, ready-to-fit unit which assumes all functions for independent heating and hot water supply. Depending on the respective system and application, the hot water output is configured to ensure that multiple draw-off points can be supplied at the same time. The domestic water can be heated on demand, so there is no longer any need to store the domestic hot water in a tank. Only three lines (3-line system) are required: the heating flow line, heating return line and the cold water line (the hot water line and circulation are no longer required).

Advantages for you

Quick and easy installation.

Extremely convenient and hygienically safe supply of domestic hot water (according to DVGW Code of Practice W 551).

Custom control of heating for the living space to increase efficiency of your mains supply.

With weather-controlled heating circuit controller, depending on the respective station.

Select stations also suitable for problematic domestic water.

Reduced maintenance costs.

LogoComfort KS completed stations    

The LogoComfort 600 and 600+ complete stations are compact, ready-to-fit, surface-mounted and decentralised interface stations in which the hot water preparation and heating of the living space are controlled proportionally according to volume. They include the housing and ball-valve connection set, enabling quick selection and delivery, as well as easy handling.

The LogoComfort 600 is available with static heating circuit, the LogoComfort 600+ with a direct mixing circuit and 6 underfloor manifolds or with direct mixing circuit and 9 underfloor manifolds, as well as a second static heating circuit.

LogoComfort complete station offered as surface-mounted or flush-mounted versions, and with copper-brazed or stainless steel-brazed heat exchangers.

Logotherm interface stations with optional features can be configured upon request.   .

  

Technical Specifications  

  

Hydraulically controlled.

Max. heating/sanitary pressure: 6 bar / PN 10.

Max. permissible heating/sanitary temperatures: 110 °C / 110 °C.

Heating capacity (at 20 K): 10 kW.

Hot water output: 15* - 17** - 20*** l/min. (or 36* - 46** - 50*** kW)

* Defined with a supply temperature of 55 °C and a heating of 35 K (other flow regulators are required).

** Defined with a supply temperature of 65 °C and a heating of 40 K.

*** Defined with a supply temperature of 65 °C and a heating of 35 K (other flow regulators are required).   

  

Flamco PS buffer vessels

Flamco Group   

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Buffering and Water Heating   

Flamco has a very wide range of high-quality direct and indirectly fired hot water cylinders and buffer vessels for drinking water and heating installations, available as enamelled, stainless steel or carbon steel. Made from quality materials and insulated according to strict environmental guidelines to provide a high heat output, they are very energy efficient. A revolutionary form of heat storage is available in the form of our FlexTherm Eco, it is twice as fast and three times as compact with an extremely low standing loss (A+ rating). The range includes tap water supply systems and thermal buffer tanks for heating, cooling or combi boiler systems. .   

Buffer Vessels - Heating/Cooling Systems   

PS buffer vessels    

PS 200 - 5000   

Buffer vessels for use in closed heating installations. Can also be used as buffer vessel in cooling installations (insulation for cooling installations is not available; for buffer vessels for cooling installations provided with insulation, see Flamco PSK).

On a construction with adjustable feet for accurate levelling (up to 2000 litres).

Can be connected with several buffer vessels.

Temperature sensor connections: G½" (4x).

Connections under a 90° angle, enabling an angular setting.

Alternative connections, capacities and operating pressures are available upon request..   .

  

Technical Specifications  

  

Maximum working pressure: 3 bar.

Maximum working temperature: 95 °C.

Steel vessel (made of S235JR): Outside powder-coated, inside untreated.

Insulation (Excluded - Can be ordered separately (see Chapter 'Accessories for Water Heaters and Storage Vessels'):

EPS insulating mantle (fire category B1) with a polypropylene outer shell in white (RAL 9010) / white aluminium (RAL 9006)..   

  

Flamco Flexvent

Flamco Group   

The Flamco Group is part of the Dutch technology concern Aalberts Industries N. V. 

Flamco is an internationally active group concentrating on technical products in the field of heating, cooling and solar systems. Together with their sister companies Meibes and Simplex they cover a broad spectrum of innovative building technology systems.  

The synergy effects of this strong coalition make Flamco a competent partner n total solutions are desired – complete from the source to the emitter. 

Air / Dirt Separation and Dosing Solutions   

Installations in which the water has been properly degassed, and are free from all kinds of dirt particles, use less energy, produce less noise and have a longer service life. Flamco products provide these sustainable solutions. In our products we use established principles combined with new technologies, such as with the XStream series of air and dirt separators, optimised to separate air and dirt particles from the system water in installations. In addition we offer solutions to easily introduce additives and cleaners to the system. .   

Air Vents   

Flexvent automatic air vents    

The compact, proven design has high efficiency and guaranteed operation for heating and air conditioning.

The water within the installation contains air which can form corrosion and reduce the thermal transfer. A Flexvent is fitted at places where the air collects.

Flexvent float vents are made of brass. Most types are equipped with a shut-off valve for easy fitting and dismantling.

A Flexvent float vent is easy to fit in any installation due to its very small dimensions. The relatively large air cushion at the top of each type of Flexvent float vent protects the valve seat sufficiently against contamination so that the Flexvent will not leak.

To guarantee top quality, we test all Flexvents before they leave our factory..   

Flexvent   

The compact, proven design has high efficiency and guaranteed operation for heating and air conditioning.
The water within the installation contains air which can form corrosion and reduce the thermal transfer. A Flexvent is fitted at places where the air collects.

Float operated, the air is collected in the Flexvent causing the float to drop and open the air release valve. The water pressure then pushes the air out, the float rises and closes the valve.
The air cushion in the upper part of each Flexvent protects the valve seat against contamination.

With protective cap including expansion sealer rings to prevent leaks.Substantial distance between the water and the closing mechanism, reducing the chance of contamination.Most types are equipped with a shut-off valve for easy fitting and dismantling.A Flexvent float vent is easy to fit in any installation due to its very small dimensions.The relatively large air cushion at the top of each type of Flexvent float vent protects the valve seat sufficiently against contamination, so that the Flexvent will not leak.To guarantee top quality, we test all Flexvents before they leave our facility!

    

  

Technical Specifications  

  

Minimum/Maximum working temperature: -10 °C / 90 °C (peak load: 120 °C).

Minimum/Maximum working pressure: 0.2 / 10.0 bar (functional: 6.0 bar).

Suitable for addition of glycol-based anti-freeze up to 50%.